BYK Additives & Instruments

1|2|3|4|A|B|C|D|E|F|G|H|I|K|L|M|N|O|P|Q|R|S|T|U|V|W|Z
1
1/23 CAP 1000+ L, 115V1/23 CAP 2000+ L, 115V
1/23 CAP 2000+ L, 230V17 in. Flat Screen Monitor
17 in. Monitor1/23 CAP 1000+ L, 230V
2
20° Punch, 0.125 in. radius
3
3-sided Tip Punch, (Boeing BSS7271)
4
4-Sided Bar 80, 30-120 µm4-Sided Bar 80, 50-200 µm
4-Sided Bar 60, 50-200 µm4-Sided Bar 60, 30-120 µm
A
Anti-Sag Meter 4-24 milsAPS 125
APS 1000Applicator Frame 80, 30-120 µm
Applicator Frame 70, 50-200 µmApplicator Frame 60, 30-120 µm
Applicator Frame 2x35, 50-200 µmAnvil, for 1125
Anvil, 3.0 in. ID, for 5513Anvil Kit, includes 5515 & 5516
Air Probe D, 1.5mAnti-Sag Meter 3-12 mils
Anti-Sag Meter 14-60 milsAnti-Sag Meter 1-6 mils
Air Probe D, 8mAir Probe D, 3m
APS 30Air Probe C, 8m
Air Probe C, 3mAir Probe C, 1.5m
Air Filter Pad for LCS IIIAPS 250
Arm SupportAPS 3000
ASC-T 2Automatic Film Applicator S
Automatic Cupping Testerauto-match RCS Software
auto-match III 45/0, 230 Vauto-match III 45/0, 115 V
ASTM G14 Accessory Kit*ASTM D2486 Brush
ASC-T 5ASC-T 3
ASC-T 1APS 50
ASC-T 05ASC-E 5
ASC-E 3ASC-E 2
ASC-E 1Advanced NRS3 Right angle
ArmAPS 7000
APS 5000APS 500
Advanced NS3ASC-E 05
Advanced NKS3Abrasion Tester, ISO, 115V
AdapterAccessory Kit, ISO 11998
Accessory Kit, DIN 53778Accessory Kit, ASTM D 4828
Accessory Kit, ASTM D 4213Accessory Kit, ASTM D 3450
Accessory Kit, ASTM D 2486Accessory Kit 50 mm
Abrasion Tester, ISO, 220VAbrasion Tester, DIN, 220V
Adapter Fixture Device*Abrasion Tester, DIN, 115V
Abrasion Tester, ASTM D4828, 220VAbrasion Tester, ASTM D4213, 220V
Abrasion Tester, ASTM D4213, 115VAbrasion Tester, ASTM D3450, 220V
Abrasion Tester, ASTM D3450, 115VAbrasion Tester, ASTM D2486, 220V
Abrasion Tester, ASTM D2486, 115VA Lamp for 6072-6075
Advanced NAS3Adapter
Abrasion Tester, ASTM D4828, 115VAdavanced FNS3
Advanced FN3Advanced N90S3
Added Weight 1kg, for 5512Advanced N45S3
Advanced N3Advanced N0S3
Advanced FTS3Advanced FS3
Advanced FRS3 Right angleAdvanced FNTS3
Advanced FNRS3 Right angleAdvanced FT3
Advanced FKS3Added Weight 2lbs, for 5520/5522
Advanced F90S3Adhesive Kit
Adhesive Tape for ASTMAdhesive Tape for DIN/ISO
Adhesive Tape for foil probeAdvanced F0S3
Advanced F3Advanced F45S3
addista® - color standards
B
byko-drive Gbyko-spectra basic, CWF, 230V
byko-cut thickness, Metricbyko-drive V
byko-drive XL, G with glass platebyko-drive XL, V with vacuum plate
byko-spectra basic, CWF, 115Vbyko-spectra lite 115 V
byko-spectra basic, TL84, 115Vbyko-spectra basic, TL84, 230V
byko-spectra effectbyko-spectra lite 230 V
byko-spectra lum 115 Vbyko-spectra mini, CWF, 115V
byko-cut no cutters, Metricbyko-spectra lum 230 V
byko-cut thickness, Englishbyko-chart Spreading Rate L
byko-cut no cutters, Englishbyko-chart Sag and Leveling 7B
byko-chart plain white WAbyko-spectra mini, TL84, 115V
byko-chart plain white WBbyko-chart plain white WG
byko-chart plain white WHbyko-chart plain white WK
byko-chart Spreading Rate Sbyko-chart, uncoated S
byko-chart SR-Checkerboard 10Hbyko-chart SR-Display 8H
byko-chart, uncoated Lbyko-chart, uncoated M
byko-chart, uncoated N2Abyko-chart, uncoated N2C
byko-chart, uncoated N9Abyko-spectra mini, CWF, 230V
byko-visc Basic EX Hbyko-spectra mini, TL84, 230V
byko-visc Basic Rbyko-visc Advanced L
byko-visc Advanced Rbyko-visc Basic EX L
byko-visc Basic EX Rbyko-visc Basic H
byko-visc Basic Lbyko-visc DS
byko-visc Advanced EX Rbyko-visc Premium H
byko-visc Premium Lbyko-visc Premium R
byko-visc SoftwareBYKWARE smart-lab
BYKWARE smart-lab hazebyko-chart plain black BK
byko-visc Advanced Hbyko-visc Advanced EX L
byko-spectra pro 115 Vbyko-test 8500 B Fe
byko-spectra pro 230 Vbyko-spectra standard 115V
byko-spectra standard 230Vbyko-test 4200 Fe
byko-test 4200 Fe EC, probe 3638byko-test 4500 Fe/NFe
byko-test 4500 Fe/NFe EC, probe 3639byko-test 8500 B Fe/NFe
byko-visc Advanced EX Hbyko-test 8500 B NFe
byko-test 8500 B, no sensorbyko-test 8500 P Fe
byko-test 8500 P Fe/NFebyko-test 8500 P NFe
byko-test 8500 P, no sensorbyko-test 8500 Software
byko-chart plain white NWKbyko-chart Display 8B
byko-chart Penopac 1BBSI Density Cup
Black Standard, BYK-mac iBottom plate black / white
Brass Shims ASTM D2486Brush
Brush Holder & Mat, ASTMBrush Holder and Mat, DIN
BSI Density Cup w/tare weightBlack Glass Panel
Bubble Viscometer A-TBubble Viscometer A5-A1
Bubble Viscometer U-Z6Bubble Viscometer Z7-Z10
Buchholz Slip-on Weight, byko-cutBuchholz Tester
Buchholz Tester w/microscopeBlack Scrub Panel P121-10N
Birch Venner Panel, R7DButterfly Stirrer 1000 ml
Ball Punch 0.625 in.Balanced Beam Scratch Tester
byko-chart Penopac 1ABall Point 1/8 in
Ball Punch 0.125 in.Ball Punch 0.250 in.
Ball Punch 0.375 in.Ball Punch 0.500 in.
Base Assembly, for 1120/5545Bi-metal Thermometer
Base PlateBase, for 5513
Battery PackBattery Pack
Battery Pack micro-wave-scanBattery Pack, AW-4840/4846
Battery Pack, BYK-macBuchholz Tool, byko-cut
Ball Point 1/16 inButterfly Stirrer 125 ml
byko-chart Opacity-Display 21Bbyko-chart Opacity 2C
byko-chart Opacity 3Bbyko-chart Opacity 5C
byko-chart Opacity Lbyko-chart Opacity S
byko-chart Opacity-Display 12Hbyko-chart Opacity-Display 9A
byko-chart Chromolux Sbyko-chart Opacity-Display 9B
byko-chart PE film, 100 µm (4 mil)byko-chart PE film, 50 µm (2 mil)
byko-chart PE Film, 76 µm (3 mil)byko-chart Penopac 18A
byko-chart Penopac 19BRButterfly Stirrer 2000 ml
byko-chart Opacity 2Abyko-chart Penopac 18B
byko-chart Chromolux MBYK-mac i COLOR Sensor
Butterfly Stirrer 3000 mlButterfly Stirrer 500 ml
Butterfly Stirrer 5000 mlBYK-mac i 12 mm
BYK-mac i 23 mmBYK-mac i COLOR
Butterfly Stirrer 250 mlBYK-mac i ROBOTIC
BYK-mac i Sensor 23 mmbyko-chart brightened 2A
byko-chart Brushout 2DXbyko-chart Brushout 5DX
byko-chart Brushout WDXbyko-chart Chromolux L
BYK-mac i Sensor 12 mm
C
Comb Gage 5-150 µmClarity Calibration Standard, for 4775
Clarity Reference Standard, for 4775Cleaning Set, BYK-mac
cloud-runnerComb Gage 1-80 mils
Comb Gage 25-2000 µmConductivity tube cell, LC 2
Comb Gage Set, plasticConductivity Meter LC 2
Conductivity plate cell, LC 2Conical Mandrel Tester
Container with Carrying Shackle or HandlesContainer with Carrying Shackle or Handles
Checking Tile, AW-4822Container with Carrying Shackle or Handles
Checking Standard micro 85°Checking tile wave-scan II
Checking Standard micro 60°XSContainer with Carrying Shackle or Handles
Checking standard 85°, AG-4601Checking Standard micro 20°
Checking Standard micro 45°Checking Standard micro 60°
Checking Standard micro 60° SChecking Standard micro 60°XS Mirror
Checking Tile wave-scan dualChecking Standard micro 75°
Checking standard 60°, AG-4601Checking Standard micro-TRI S
Checking Standard mirror, TRIChecking Standard TRI
Checking TileChecking Tile AW-4824
Container with Carrying Shackle or HandlesCross-Cut Kit 6, 6-edges 1 mm
Container with Carrying Shackle or HandlesCustomized Adapter Rings
Cross-Cut Tool 11, 6-edges 1.5 mmCross-Cut Tool 6, 1-edge 1 mm
Cross-Cut Tool 6, 1-edge 2 mmCross-Cut Tool 6, 1-edge 3 mm
Cross-Cut Tool 6, 6-edges 1 mmCross-Cut Tool 6, 6-edges 2 mm
Customized Nail AttachmentCross-Cut Tool 11, 1-edge 1 mm
Cuvette Table, for 4775CWF Lamp for 6072-6075
Cylinder KitCylinder Stylus
Cylindrical Mandrel Set, ASTMCylindrical Mandrel Set, ISO
Cert. Tube Z9Cross-Cut Tool 11, 1-edge 1.5 mm
Cross-Cut Kit 6, 6-edges 2 mmContainer with Carrying Shackle or Handles
Container with Drain ValveContainer with Carrying Shackle or Handles
Container with Drain ValveContainer with Drain Valve
Container with Drain ValveContainer with Drain Valve
Container with Drain ValveCorks
Cross-Cut Kit 6, 1-edge 3 mmCoverall Bend - Impact Tester
Cross-Cut Kit 11, 1-edge 1 mmCross-Cut Kit 11, 1-edge 1.5 mm
Cross-Cut Kit 11, 6-edges 1.5 mmCross-Cut Kit 6, 1-edge 1 mm
Cross-Cut Kit 6, 1-edge 2 mmCross-Cut Kit 6, 1-edge 2 mm
Checking standard 20°, AG-4601Container with Drain Valve
Cert. Tube Z8CAP Spindle No. 5
CAP 2000+ L, 230VCAP Spindle No. 1
CAP Spindle No. 10CAP Spindle No. 2
CAP Spindle No. 3CAP Spindle No. 4
CAP Spindle No. 6CAP 2000+ H, 230V
CAP Spindle No. 7CAP Spindle No. 8
CAP Spindle No. 9CAPCALC 32 Software
Cert. Bubble Viscometer A-TCert. Bubble Viscometer A5-A1
Cable ReleaseCAP 2000+ L, 115V
CAP 2000+ H, 115VCert. Bubble Viscometer Z7-Z10
Calibration Holder 60°XSCert. Tube Z7
Cable, per meterCalibration Holder
Calibration Holder 20°Calibration Holder 45°
Calibration Holder 60°Calibration Holder 75°
CAP 1000+ L, 115VCalibration Holder 85°
Calibration Holder TRICalibration Shims 11-980 µm
Calibration Shims 25-500 µmCalibration Tool, for 5513
CAP 1000+ H, 115VCAP 1000+ H, 230V
Cert. Bubble Viscometer U-Z6CAP 1000+ L, 230V
Cert. Tube ACert. Tube Y
Cert. Tube RCert. Tube S
Cert. Tube TCert. Tube U
Cert. Tube VCert. Tube X
Cert. Tube ZCert. Tube P
Cert. Tube Z1Cert. Tube Z10
Cert. Tube Z3Cert. Tube Z4
Cert. Tube Z5Cert. Tube Z6
Cert. Tube A1Cert. Tube Q
Cert. Tube WCert. Tube O
Cert. Tube FCert. Tube A2
Cert. Tube NCert. Tube A4
Cert. Tube A5Cert. Tube B
Cert. Tube CCert. Tube D
Cert. Tube ECert. Tube A3
Cert. Tube GCert. Tube H
Cert. Tube ICert. Tube J
Cert. Tube KCert. Tube L
Cert. Tube M
D
Dispermat® SL25-nanoDispermat® LC75 EX
Dispermat® SL Nano Kit, for SL25Dispermat® SL Nano Kit, for SL5/12
Dispermat® SL-BDispermat® SL-M 5
Dispermat® SL100-nanoDispermat® SL12-nano
Dispermat® SL200-nanoDissolver Shaft DL, TML 10, 50
Dispermat® SL5-nanoDispermat® SL50-nano
Dissolver Shaft DL, TML 1, 5Dispermat® LC25 EX
Docking StationDocking Station, AW-4824
Dolly Set 14 mmDocking Station, AW-4840/4846
Dolly Set 10 mmDispermat® LC55 EX
Dispermat® VL15-CDispermat® CN100
Dispermat® AE1-CDolly Set 50 mm
Dispermat® VL03-CDispermat® VL05-C
Dispermat® VL10-CDispermat® VL25-C
Dispermat® VL45-CDispermat® VL60-C
Dispermat®  CN 40Dispermat® AE11-C
Dispermat® CN 90Dispermat® AE11-C EX
Dispermat® AE11-M EXDispermat® AE12-C
Dispermat® AE12-C EXDispermat® AE12-M EX
Dispermat® CN 50Dispermat® CN 60
Dispermat® CN 70Dispermat® CN 80
Dolly Set 20 mmDrying Time Recorder 230V
Double Bar 12 mm, 38 & 76 µmDrip pan, for 2121/2122
Double-wall, 1000 ml receptacleDouble-wall, 2000 ml receptacle
Double-wall, 250 ml receptacleDouble-wall, 500 ml receptacle
Dow Latex ApplicatorDPM 300 Digital Pocket Microscope
Drawndown PlateDrilling Template
Drip Pan, XLDouble Wall SS Container
Drying Time Recorder 115VDispermat® VL01-C
Dual-Sensor 2000/2000Dual-Sensor 5000/2000
DUALSCOPE MP0RDUR-O-Test, 0.75 mm
DUR-O-Test, 1 mmDust Cover, for Analytical Balances with draft shield
Dymo Label Printer 450Double Wall SS Container
Double Wall SS ContainerDouble Bar 2″ - 2&4 mils
Double Wall SS ContainerDouble Bar 2″ - 6&10 mils
Double Bar 3″ - 2&4 milsDouble Bar 3″ - 6&10 mils
Double Bar 4″ - 2&4 milsDouble Bar 4″ - 6&10 mils
Double Bar 5″ - 2&4 milsDouble Bar 5″ - 6&10 mils
Double Bar 6″ - 2&4 milsDouble Bar 6″ - 6&10 mils
Double Wall SS ContainerDouble Wall SS Container
Double Wall SS ContainerDouble Wall SS Container
Double Wall SS ContainerDouble Wall SS Container
Double Wall SS ContainerDouble Wall SS Container
Double Wall SS ContainerDouble Wall SS Container
Double Wall SS ContainerDispermat® VL02-C
Docking Station, BYK-macDispermat® SL-M 50
Dispermat CV4, 220VDispensing tip 0.2 mm
Dispensing tip 0.5 mmDispensing tip 0.9 mm
Dispermat CV3 plus, 115VDispermat CV3 plus, 115V
Dispermat CV3 plus, 220VDispermat CV3 plus, 220V
Dispermat CV4, 115VDispermat LC110-12, 220V, w/safety dev.
DIN Flow Cup 2 - 8 mmDispermat LC110-6, 220V, w/safety dev.
Dispermat LC15, 115V, w/cont. clampDispermat LC15, 220V, w/cont. clamp
Dispermat LC220-12, 400V, w/safety dev.Dispermat LC220-6, 400V, w/safety dev.
Dispermat LC30, 115V, w/cont. clampDispermat LC30, 220V, w/cont. clamp
Dispermat LC300, 400V, w/safety dev.Dispermat LC400, 400V, w/safety dev.
DIN Flow Cup 4mmDIN Dip Cup 4mm, Polyamide
Dispermat LC55, 115V, w/cont. clampData Cable, RS232C/USB
Dispermat® SL-M 25D-Glass Cuvette 11, screw top
D-Glass Cuvette, 11 mm, openD-Plastic Cuvette, open
D-Plastic Cuvette, plastic coverD65 Halogen Lamp for 6072-6075
Dart Drop Impact Tester, ADart Drop Impact Tester, A/B
Data Cable USB/USB-ADaylight Tube, byko-spectra effect
DIN Dip Cup 4mm, AluDetachable Tip Punch, 1.0 in. Diameter
Detachable Tip Punch, 1.0 radiusDie 0.313 in.
Die 0.563 in.Die 0.640 in.
Die 1.00 in.Die Adapter, 1.25 in. ID
Digital Temperature IndicatorDIN Brush
Dispermat LC55, 115V, w/ safety dev.Die, 27 mm diameter, for 5512
Dispermat LC55, 220V, w/cont. clampDispermat® CN 20
Dispermat® AE7-M EXDispermat® SL-M 200
Dispermat® AE8-C EXDispermat® AE8-M EX
Dispermat® AE9-CDispermat® AE9-C EX
Dispermat® AE9-M EXDispermat® CN 10
Dispermat® CN 30Dispermat® AE7-C
Dispermat® SL-C 100Dispermat® SL-C 12
Dispermat® SL-C 200Dispermat® SL-C 25
Dispermat® SL-C 5Dispermat® SL-C 50
Dispermat® SL-M 100Dispermat® SL-M 12
Dispermat LC55, 220V, w/safety dev.Dispermat® AE7-C EX
Dispermat® AE8-CDispermat® AE6-M EX
Dispermat® AE2-M EXDispermat LC75, 220V, w/cont. clamp
Dispermat LC75, 220V, w/safety dev.Dispermat® AE1-C EX
Dispermat® AE1-M EXDispermat® AE10-C
Dispermat® AE6-C EXDispermat® AE10-M EX
Dispermat® AE2-CDispermat® AE2-C EX
Dispermat® AE10-C EXDispermat® AE3-C
Dispermat® AE6-CDispermat® AE3-M EX
Dispermat® AE4-CDispermat® AE4-C EX
Dispermat® AE4-M EXDispermat® AE5-C
Dispermat® AE5-C EXDispermat® AE5-M EX
Dispermat® AE3-C EX
E
EZ Zahn Cup No.1EZ Zahn Cup No.1
EZ Zahn Cup No.2EZ Zahn Cup No.2
EZ Zahn Cup No.5EZ Zahn Cup No.3
EZ Zahn Cup No.3EZ Zahn Cup No.4
EZ Zahn Cup No.4EZ Zahn Cup No.5
Extension 3mExtension 5m
Entris 224-1Sesp-10 Impact Tool
Entris 124-1Sesp-10
Empty Tube Set (144)Empty Tubes Grade A
Empty Tubes Grade NEmpty Tubes Grade B
Entris 2202-1SEntris 323-1S
Entris 6202-1SEntris 623-1S
Entris 8201-1S
F
Filter Wheel, even numbersFlow Cup Stand with water jacket
FKS, SeparateFixing Device*
Fixing Device for PT-100 ProbeFilter Wheel, odd numbers
Film Casting Knife 8″Film Casting Knife, 5 cm
Film Casting Knife, 30 cmFilm Casting Knife, 20 cm
Film Casting Knife, 15 cmFilm Casting Knife, 10 cm
FNRS, Right angleFilm Casting Knife 6″
FN, Built-inFord Viscosity Cup No. 2
FNS, SeparateFNTS, Separate
Foil ProbeFord Cup Accessory Kit
Ford Viscosity Cup No. 2Ford Viscosity Cup No. 3
Film Casting Knife 2″Ford Viscosity Cup No. 3
Ford Viscosity Cup No. 4Ford Viscosity Cup No. 4
FOS,0, micro-probeFRS, Right angle
FS, SeparateFT, Built-in
FTS, SeparateFilm Casting Knife 4″
Falling Weight 1 lbs, for 5513Film Casting Knife 12″
Falling Weight 2 lbs, 0.50 in. ball diameter, for 5512Fe-sensor 5000 µm
F, Built-inF45S, 45, micro-probe
F90S, 90, micro-probeFalling Weight 0.5 lbs, for 1115
Falling Weight 0.5 lbs, for 1120/5545Falling Weight 1 kg, for 1120/5545
Falling Weight 1 lbs, for 1120/5545Falling Weight 10 lbs, for 5513
Falling Weight 100 g, for 1120/5545Falling Weight 12 lbs, for 5513
Falling Weight 16 lbs, for 5513Falling Weight 1kg, for 5512
Falling Weight 2 kg, for 1120/5545Falling Weight 0.5 lbs, for 5513
Falling Weight 2 lbs, 0.625 in. ball diameter, for 5512Falling Weight 4 lbs, for 5513
Falling Weight 2 lbs, for 1115Fe-sensor 2000 µm
Falling Weight 8 lbs,for 5513Falling Weight 8 lbs, for 1120/5545
Falling Weight 6 lbs, for 5513Falling Weight 500 g, for 1120/5545
Falling Weight 6 lbs, for 1120/5545Falling Weight 4 lbs, for 1125
Falling Weight 4 lbs, for 1120/5545Falling Weight 4 lbs, for 1115
Falling Weight 300 g, for 1120/5545Falling Weight 3 lbs, for 5513
Falling Weight 2 lbs, for 5513Falling Weight 2 lbs, for 1120/5545
G
Grind Gage No. 52Grind Gage No. 6252 - G2
Grind Gage No. 5251Grind Gage No. 5252
Grind Gage No. 5252-NGrind Gage No. 5254
Grind Gage No. 5254-NGrind Gage No. 54
Grind Gage No. 6251 - G1Grindometer 50
Grind Gage No. 6254 - G4Grind Gage No. 65
Grind Gage No. PB-20Grind Gage No. PD-250
Grindometer 100Grindometer 15
Grindometer 25Guide Tube, for 1120
Guide Tube, for 5545Grind Gage No. 45
Grind Gage No. 51Glass Plate
Grind Gage No. 25Gardner-scrub, ASTM D2486
Glass Slide SetGage Body, Advanced
Gage Body, StandardGardner Comparator
Gardner Comparator L, 115VGardner Liquid Standard L 115
Gardner Liquid Standard L 230Gardner Liquid Standards
Gardner Comparator L, 230VGardner-scrub, base
Gardner-scrub, ISO 11998Glass Cover
Glass CoverGlass Cover
Glass Panel HolderGlass Plate
Glass plate + clamp, for 2122Gardner-scrub, ECE 43
Glass Plate, XL
H
Heavy-Duty Propeller BladeHeavy-Duty Propeller Blade
Heavy-Duty Propeller BladeHeavy-Duty Propeller Blade
Heavy-Duty Dispersion ImpellerHeavy-Duty Propeller Blade
Heavy-Duty Propeller BladeHeavy-Duty Impact Tester Metric
Heavy-Duty Impact Tester EnglHelio Stand, 220V
Helio Stand, 110VHolding rack without illumination
Helipath Stand, 115VHelipath Stand, 230V
High Gloss StandardHigh Gloss Standard haze-gloss
Hinge Plate, for 1125Hoffman Scratch Tester
Holder for 5 TubesHolder for Inmont Gage
Holding clamp/Burette AssemblyHolding rack with illumination
Heavy-Duty Dispersion ImpellerHeavy-Duty Dispersion Impeller
HZ Lamp for 6072-6075Heavy-Duty Dispersion Impeller
Haze Standard haze-glossHeavy-Duty Dispersion Impeller
HADV-E, 220VHADV-E,115V
Halogen Lamp, LCM/LCS III - IVHard Metal Needle 0.75 mm
Haze Standard 1, for 4775Haze Standard 10, for 4775
Haze Standard 20, for 4775Haze Standard 30, for 4775
Haze Standard 5, for 4775Hard Metal Needle 1 mm
Haze Standard Set, for 4775Heavy-Duty Dispersion Impeller
haze-gard iHeavy-Duty Dispersion Impeller
Heavy-Duty Dispersion ImpellerHeavy-Duty Dispersion Impeller
Heavy-Duty Dispersion ImpellerHeat Sink pro
Heat Sink basicHBDV-E, 220V
HBDV-E, 115Vhaze-gloss
I
IR Probe HInter-leaf Paper 1P-1K
Interchangeable Orifice 8mmInterchangeable Orifice 6mm
Interchangeable Orifice 4mmInterchangeable Orifice 3mm
Interchangeable Orifice 2mmInmont Gage S, 10-30 mils
Inter-leaf Paper 1P-1BInter-leaf Paper 1P-1A
Inmont Gage S, 50-250 µmInmont Gage S, 200-700 µm
Inmont Gage S, 2-12 milsInmont Gage S, 0-40 µm
ISO Arm AdapterIR Probe I
ISO Panel Set for 6040 - 6043ISO Cup L
ISO Impact TesterISO Standard Dirt
ISO Panel Set for 6060/6061ISO Panel Set for 6051 - 6054
ISO Panel Set for 6046/6047Inmont Gage S, 0-20 µm
ISO PadISO Flow Cup 6 mm
ISO Cup L, CertifiedISO Flow Cup 5 mm
ISO Flow Cup 4 mmISO Flow Cup 3 mm
ISO Dip Cup 5mm, AluISO Dip Cup 4mm, Alu
ISO Cup S, CertifiedISO Cup S
Inmont Gage S, 0-4 milsInter-leaf Paper 1P-1C
Inmont Gage S, 0-2 milsImpeller, 175 mm ø *
Impeller, 90 mm øImpeller, 90 mm ø
Impeller, 80 mm øImpeller, 80 mm ø
Impeller, 70 mm øImpeller, 60mm ø
Impeller, 150 mm ø *Inmont Gage S, 0-100 µm
Impeller, 150 mm øImpeller, 125 mm ø *
Impeller, 125 mm øImpeller, 100 mm ø *
Impeller, 100 mm øImpeller, 100 mm ø
Illuminator 230 VIncandescent Lamp 115V for 6745
Incandescent Lamp 230V for 6746Indenter, PF-5405
Inmont Gage L, 0-1 milInmont Gage S, 0-1 mils
Inmont Gage R, 50-250 µmInmont Gage R, 200-700 µm
Inmont Gage R, 2-12 milsInmont Gage R, 10-30 mils
Inmont Gage R, 0-40 µmInmont Gage R, 0-4 mils
Illuminator 115 VInmont Gage R, 0-20 µm
Inmont Gage R, 0-2 milsInmont Gage R, 0-100 µm
Inmont Gage R, 0-1 milsInmont Gage L, 0-40 µm
Inmont Gage L, 0-20 µmInmont Gage L, 0-2 mil
K
KU-2, 230VKU-2, 115V
KU-2 with air purge, 230VKU-2 with air purge, 115V
KU-2 SpindleKU-2 Paste Spindle
König Pendulum
L
Liquid Color Standar No.15Liquid Color Standar No.4
Liquid Color Standar No.3Liquid Color Standar No.2
Liquid Color Standar No.18Liquid Color Standar No.17
Liquid Color Standar No.16Liquid Color Standar No.14
Light-Weight Propeller BladeLiquid Color Standar No.5
Liquid Color Standar No.12Liquid Color Standar No.11
Liquid Color Standar No.10Liquid Color Standar No.1
Lipstick KitLilly Frame
Liquid Color Standar No.13Liquid Color Standar No.7
Liquid Color Standar No.6LV Spindles No.2
Light-Weight Propeller BladeLVDV-E, 220V
LVDV-E, 115VLV Spindles Set 1-4
LV Spindles No.4LV Spindles No.3
LV Spindles No.1Liquid Color Standar No.8
LV Quick Connect Kit w/RackLow Viscosity Adapter
Low Vicosity Adapter, with water jacketLoop Stylus
Long Push Arm, pair, Adjustable gapLiquid Metering System
Liquid Color Standar No.9Light-Weight Propeller Blade
Lamp Kit for 6053/6054Light-Weight Dispersion Impeller
Label 0 - 100 kg-cmLamp Kit, certified for 6051/6052
Lamp Kit, certified for 6046/6047Lamp Kit, certified for 6043
Lamp Kit, certified for 6042Lamp Kit, certified for 6041
Lamp Kit, certified for 6040Lamp Kit for 6051/6052
Lamp Kit, certified for 6060/6061Lamp Kit for 6046/6047
Lamp Kit for 6043Lamp Kit for 6042
Lamp Kit for 6041Lamp Kit for 6040
Label 0 - 200 kg-cmLight-Weight Dispersion Impeller
Lamp Kit, certified for 6053/6054Lamp Kit for 6060/6061
Large Die 21.2 mm diameter, for 5512Lift Screw
Light-Weight Dispersion ImpellerLarge Die, 17 mm diameter, for 5512
Light-Weight Dispersion ImpellerLight-Weight Dispersion Impeller
Light-Weight Dispersion ImpellerLight-Duty Impact Tester
Light Protection Cover for 7036Light Protection Cover, BYK-mac
Li-Ion Battery , LCM IIILeveling/Sagging Tester
Leveling Test BladeLeslie Applicator
Lead Holder, PH-9500LCS IV
LCM IVLarge Rider
M
Milling Impeller DMS 70Milling Impeller EMS T90
Milling Impeller DMS 80Milling Impeller EMS T20*
Milling Impeller EMS T30*Milling Impeller EMS T45*
Milling Impeller EMS T60*Milling Impeller EMS T75*
Modification Kit ISOMINI Pearl Mill Head
Mirror Gloss StandardMirror Gloss Standard, AG-4601
Modification Kit ASTM D2486Modification Kit ASTM D3450
Modification Kit ASTM D4213Modification Kit ASTM D4828
Modification Kit DINMilling Impeller DMS 45
Milling Impeller DMS 60micro-gloss 20°
Milling Impeller DMS 32micro-gloss 60° XS-S
MagnifierMagnifier, PF-5405
MC25 Pearl Mill HeadMechanical Cupping Tester
MICRO Pearl Mill Headmicro-gloss 45°
Milling Impeller DMS 28micro-gloss 60° XS
micro-gloss 60°micro-gloss 60° S
micro-gloss 75°micro-gloss 85°
micro-TRI-glossmicro-TRI-gloss μ
micro-TRI-gloss Smicro-wave-scan
Milling Impeller DMS 100Milling Impeller DMS 150
N
Neoprene Gasket SNYPC Leveling Test Blade
NS, SeparateNRS, Right angle
NOS, 0, micro-probeNKS, Separate
NFe-sensor 2000 µmNew Article
Neoprene Gasket LN, Built-in
Needle Set, 1mmNeedle Set 2 mm
NAS, SeparateNail Kit
N90S, 90, micro-probeN45S, 45, micro-probe
Needle Stylus
O
Object Probe B, 8mObject Probe A, 8m
Object Probe B, 1.5mObject Probe B, 3m
Open Probe F, 3mObject Probe G
Online Cable, BYK-macOnline Cable, spectro2guide
Open Probe F, 1.5mObject Probe A, 1.5m
Object Probe A, 3mOpen Probe F, 8m
O-ring Set (10 pcs), for 2121/2122O-Ring Kit for SL-5
O-ring Kit for SL5-nanoO-Ring Kit for SL-12
O-Ring Kit for SL-12O-Ring Kit for SL-25
O-Ring Kit for SL-25O-Ring Kit for SL-5
O-ring Kit for SL12-nanoO-ring Kit for SL12-nano
O-ring Kit for SL25-nanoO-ring Kit for SL25-nano
O-ring Kit for SL5-nano
P
Precision Plastic Shim 48 µmPrinter
Precision Plastic Shim 6.0 milsPrecision Plastic Shim 5.5 µm
Precision Plastic Shim 5.0 milsPrecision Plastic Shim 485 µm
Precision Plastic Shim 2.0 milsPrecision Plastic Shim 350 µm
Precision Plastic Shim 35.5 µmPrecision Plastic Shim 254 um
Precision Plastic Shim 22.5 µmPrecision Plastic Shim 20.0 mils
Printer Paper, for Printer 1607Precision Plastic Shim 11 µm
Printer PaperPT-100 Temperature Probe
Protectice Cap, BYK-mac 12 mmProtection Pipe for DL Shaft TML 1, 5
Protection Pipe for DL Shaft TML 10, 50Protective Cap, BYK-mac 23 mm
Protective Cap, spectro2guidePT-100 EX Temperature Probe
PTFE tubing 1.5/0.2 mmPTFE tubing 1.5/0.5 mm
PTFE tubing 1.5/0.9 mmPumping and Mixing System, 1L
Pumping and Mixing System, 3LPumping and Mixing System, 5L
Push-bar weight, 1000 gramsPush-bar weight, 500 grams
Precision Plastic Shim 10.0 milsPrecision Plastic Shim 100 µm
Precision Plastic Shim 0.2 milsPrecision Plastic Shim 1.0 mils
Permeability Cup SP-Glass Cuvette, 10 x 10
P-Glass Cuvette, 10 x 50Precision Plastic Shim 0.5 mils
Pad HolderPaddle Spindle
PC Dosing UnitPC-Datex Software with USB Cable
Pencil Hardness Tester SetPencil set (20 pcs), PH-5800
Pendulum Hardness Test König/PersozPendulum Hardness Tester König
Pendulum Hardness Tester PersozPentium computer w/keyboard
Permeability Cup LP-Glass Cuvette, 11 mm
Persoz PendulumPosiTest AT
Precision MicroscopePower Supply, LCM/LCS III
Power supply, for 2121/2122PosiTest Verifier Kit
Pfund CryptometerPosiTest ATA-20
PosiTector DPM StandardPosiTector DPM Advanced
PosiSoft SoftwarePolyethylene Gasket S
Polyethylene Gasket LPocketGoniometer PGX+
Phenolic Standard 40.0 mils
Q
Quintix 612-1SQuintix 513-1S
Quintix 5102-1SQuintix 5101-1S
Quintix 5100-1SQuintix 313-1S
Quintix 3102-1SQuintix 213-1S
Quintix 124-1SQuintix 1102-1S
Quinitix 224-1SQuick Coupler*
Quick Coupler*Quintix 2102-1S
R
RV/HA/HB Spindle No.3Ring Stand for Flow Cups
Rubber Stopper,#6453RV Quick Connect Kit w/Rack
RV/HA/HB Spindle No.1RV/HA/HB Spindle No.2
RV/HA/HB Spindle No.7RV/HA/HB Spindle No.4
RV/HA/HB Spindle No.5RV/HA/HB Spindle No.6
RV/HA/HB Spindle Set of 6Replacement Scraper ISO
RVDV-E, 115VRVDV-E, 220V
Replacement Scraper, 117 mmReplacement Leads, Grade 2B, PH-9500
Replacement Scraper 95 mmReplacement Leads, Grade 4H, PH-9500
Replacement Leads, Grade HB, PH-9500Rack 16, cylindrical - square
Rack 7, rectangleReplacement Leads, Grade 2H, PH-9500
Replacement Leads, Grade 3H, PH-9500Replacement Leads, Grade 4B, PH-9500
Replacement Leads, Grade 3B, PH-9500Replacement Leads, Grade 5B, PH-9500
Replacement Leads, Grade 5H, PH-9500Replacement Leads, Grade 6B, PH-9500
Replacement Leads, Grade 6H, PH-9500Replacement Leads, Grade B, PH-9500
Replacement Leads, Grade F, PH-9500Replacement Leads, Grade H, PH-9500
S
Spray Monitors M12-BWSponge Holder, 1000g
Sponge Holder, 450gSponge, B (pack of 6)
Sponge, Polyurethane (pack of 6)Sponges ASTM D3450
Sponges ASTM D4213Sponges ASTM D4828
Square Frame 4″, 0.5-6 milsSpray Monitors M33-BW
Square Frame 2″, 0.5-6 milsSquare Frame 2″, 1-8 mils
Square Frame 2″, 5-50 milsSquare Frame 3″, 0.5-6 mils
Square Frame 3″, 1-8 milsSquare Frame 3″, 5-50 mils
Spirit Level, PV-0410/0411Square Frame 4″, 1-8 mils
Spit, PE-5780Spindle, Low Viscosity Adapter
Spindle, TR9Spindle R5
Spindle L1Spindle L2
Spindle L4Spindle Quick Connect
Spindle R1Spindle R2
Spindle R3Spindle R4
Spindle R6Spindle, TR8
Spindle R7Spindle set L models, set of 4(L1, L2, L3, L4)
Spindle Set R & H Models, set of 6(R2, R3, R4, R5, R6, R7)SR 03
Spindle, TL5Spindle, TL6
Spindle, TL7Spindle, TR10
Spindle, TR11Square Frame 4″, 5-50 mils
SS Split CoverSR 04
Standard NAS1Standard FRS1 Right angle
Standard FS1Standard FT1
Standard FTS1Standard N0S1
Standard N1Standard N45S1
Standard N90S1Standard NKS1
Standard for esp-10Standard NRS1
Standard NS1Step Gap Frame
Stereo Microscope, PF-5400Stop Position Clamp
Strike PlateStylus, spectro2guide
Syringe, DisposableStandard FOS1
Standard FNTS1SR 05
Stainless steel containerSR 06
SS Split CoverSS Split Cover
SS Split CoverSS Split Cover
SS Split CoverSS Split Cover
Stainless steel containerStainless steel container
Standard FNS1spectro2guide, d/8
Stainless steel containerStandard F1
Standard F45S1Standard F90S1
Standard FKS1Standard FN1
Standard FNRS1 Right angleSPI Heavy-Duty Impact Tester
Scrub Medium ASTM D2486spectro2guide, 45/0
Seal Set, BYK-macScale 8 lbs weight
Scale Label, for 2 lbs weightScale Label, for 4 lbs weight
Scotch Brite Pad, ASTMScratching Tool
Screen ProtectorScrub Media, Abrasive 474 ml (1 pint)
Scrub Medium ASTM D3450Semi Gloss Standard 20°
Sandpaper Attachment KitSemi Gloss Standard 60°
Semi Gloss Standard 85°Set of Distance Rings, for 5512
Shaft Protection Pipe, LC/CV modelsSingle Bar 2", 3 mils
Single Bar 2″, 6 milsSingle Bar 3.5″, 1.5 mils
Single Bar 3.5″, 10 milsSandpaper Holder
Sample PanSingle Bar 3.5″, 5 mils
S90 Zahn Cup No.4Special Open Probe (0.3 mm)
S90 Zahn Cup No.1S90 Zahn Cup No.1
S90 Zahn Cup No.2S90 Zahn Cup No.2
S90 Zahn Cup No.3S90 Zahn Cup No.3
S90 Zahn Cup No.4S90 Zahn Cup No.5
Sample holder, for 4775S90 Zahn Cup No.5
Sampe Platform, for 5513Sample Holder BYK-mac 12 mm
Sample Holder CosmeticsSample Holder Liquid Paste - M
Sample Holder Round Dish - GSample Holder Round Dish - M
Sample Holder Round Dish – C, spectro2guideSingle Bar 3.5″, 3 mils
Sample TableSingle Bar 3.5″, 6 mils
smart-chartSingle-wall, 500 ml receptacle
Slewable ContainerSlewable Container
Slewable ContainerSmall Die 13.9 mm diameter, for 5512
Small Die 16.3 mm diameter, for 5512Small Rider
Small Small Adaptersmart-lab Color, spectro2guide
Single-wall, 2000 ml receptaclesmart-lab Gloss
smart-process GlossSoftware smart-process Color, spectro2guide
Solid 1.25" DiameterSpace holder for PW-1712
Special Gloss StandardSingle Bar 3″, 1 mil
Special Mirror StandardSingle-wall, 250 ml receptacle
Small Sample Adapter, water jacketSingle Bar 3″, 1.5 mils
Single Bar 6″, 2.5 milsSingle Bar 3″, 3 mils
Single-wall, 1000 ml receptacleSingle Bar 3″, 6 mils
Single Bar 6″, 0.5 milsSingle Bar 6″, 1 mil
Single Bar 6″, 1.5 milsSingle Bar 6″, 12 mils
Single Bar 6″, 2 milsSingle Bar 6″, 10 mils
Single Bar 6″, 20 milsSingle Bar 6″, 3 mils
Single Bar 6″, 4 milsSingle Bar 6″, 5 mils
Single Bar 6″, 6 milsSingle Bar 6″, 8 mils
Single Wall SS ContainerSingle Wall SS Container
Single Wall SS Container
T
Tube ITube F
Tube GTube H
Tube LTube J
Tube KTube M
Tube ETransmittance Standard Set, for 4775
Tube ATube D
Tube CTube B
Tube A5Tube A4
Tube A3Tube A2
Tube A1Tripod Stand, for Flow Cups
Tube OTube N
Tube Z9Tube P
Tube Z10Transmittance Standard 70, for 4775
Tube,for 5513Tube, for 1115
Tube Z8Tube Z7
Tube Z6Tube Z5
Tube Z4Tube Z3
Tube Z1Tube Q
Tube ZTube Y
Tube XTube W
Tube VTube U
Tube TTube S
Tube RTransmittance Standard 90, for 4775
Tube Z2Transmittance Standard 50, for 4775
temp-gard pro 12pTemperature Probe, LVA Premium
Temperature Probe, LVATemperature probe, for SSA/Premium
Temperature probe, for SSAtemp-gard pro 6p, no probes
temp-gard pro 6p Ctemp-gard pro 6p
temp-gard pro 12p, no probestemp-gard pro 12p C
temp-gard logger 6pThermal Barrier pro
temp-gard logger 12ptemp-gard dual
temp-gard basic, no probestemp-gard basic C
temp-gard basictemp-chart pro
temp-chart basicTaber Abrasion Holder, for 4775
T-Bar SpindlesT-Bar Set
Thermal Barrier basicTransmittance Standard 30, for 4775
ThermometerTML5
ThermometerTransmittance Standard 10, for 4775
Transformer 03Transformer 02
Transformer 01Transformer 00
Top plate 0.007Top plate 0.002
TML50Top plate 0.0035
TML10Thickness Cutter 3, 200, byko-cut
Thermostat Heater BlockTML1
Thickness Cutter 100, byko-cutThickness Cutter 2, 1000, byko-cut
Thickness Cutter 1, 2000, byko-cutThickness Cutter 3000, byko-cut
Thin Film Holder, for 4775TL84 Lamp for 6072-6075
TML05
U
UL AdapterUV Lamp for 6072-6075
USB-wireless connectorUSB-cable haze-gloss
USB-CableUSB Interface Cable
US Midget Cup w/tare weightUS Density Cup w/tare weight
US Density CupUSB Interface Cable
U30 Lamp for 6072-6075U-Bar 3″, 6&10 mils
U-Bar 6″, 6&10 milsU-Bar 2″, 2&4 mils
U-Bar 2″, 6&10 milsU-Bar 3″, 2&4 mils
U-Bar 4";, 2 & 4 milsU-Bar 4″, 6&10 mils
U-Bar 5″, 2&4 milsU-Bar 5″, 6&10 mils
U-Bar 6″, 2&4 mils
V
Viscosity Standard K400Viscosity Standard N15000
Viscosity Standard N1000Viscosity Standard N1000
Viscosity Standard N100Viscosity Standard CAP9H
Viscosity Standard CAP9LViscosity Standard N350
Viscosity Standard CAP8LViscosity Standard CAP8H
Viscosity Standard CAP7LViscosity Standard CAP7H
Viscosity Standard CAP6LViscosity Standard CAP6H
Viscosity Standard N350Viscosity Standard RT1000
Viscosity Standard RT10Viscosity Standard RT100
Viscosity Standard RT100000Viscosity Standard RT12500
Viscosity Standard RT5Viscosity Standard RT50
Viscosity Standard RT500Viscosity Standard RT5000
Viscosity Standard RT60000Viscosity Standard S200
Viscosity Standard S200Viscosity Standard S2000
Viscosity Standard S60Viscosity Standard S600
Viscosity Standard CAP5HViscosity Standard RT30000
Viscosity Standard CAP5LViscosity Standard CAP4L
Vacuum sealing systemVerification Kit, LCS III-IV
Verification Kit, LCM III - IVVacuum sealing system
Vacuum sealing systemVacuum sealing system
Vacuum sealing systemVacuum sealing system
Viscosity Standard C100Vacuum Pump 230 V
Vacuum Pump 115 VVacuum Plate S, stainless steel
Vacuum Plate SVacuum Plate L
Viscosity Standard CAP4HViscosity Standard C10
Vacuum Plate, XLViscosity Standard C20
Viscosity Standard CAP10LViscosity Standard CAP3L
Viscosity Standard C200Viscosity Standard CAP3H
Viscosity Standard CAP2HViscosity Standard CAP1L
Viscosity Standard CAP1HViscosity Standard CAP2L
Viscosity Standard CAP10HViscosity Standard C350
Viscosity Standard CAP0HViscosity Standard C600
Viscosity Standard C60Viscosity Standard CAP0L
Viscosity Standard C35
W
Wire-wound rod 200 - 1 milsWire-wound rod 200 - 0,6 mils
Wire-wound rod 200 - 0,4 milsWire-wound rod 10″ - 4 mils
Wire-wound rod 10″ - 2 milsWire-wound rod 10″ - 3 mils
Wire-wound rod 10″ - 2,5 milsWire-wound rod 10″ - 1,5 mils
Wire-wound rod 10″ - 1 milWire-wound rod 200 - 3 mils
Wire-wound rod 10″ - 0,8 milsWire-wound rod 200 - 2 mils
Wire-wound rod Stand - 10Wire-wound rod 200 - 7 mils
Wire-wound rod 200 - 4 milsWire-wound rod 200 - 5 mils
Wire-wound rod 200 - 6 milsWire-wound Rod Adapter
Wire-wound Rod HolderWire-wound rod set 10
Wire-wound Rod Stand - 24 cmWireless Dual Fe/NFe Sensor
Wireless Fe-SensorWireless NFe Sensor
Wolf-Wilburn Pencil HardnessWire-wound rod 10″ - 0,5 mils
Wire-wound rod 10″ - 0,65 milsWet Drawdown Template - G
Wire-wound rod 10″ - 0,4 milsWeight Bar 1, for 2121/2122
Washer Probe JWater Jacket
wave-scan dualwave-scan II
wave-scan ROBOTICWire-wound rod 10″ - 0,3 mils
Wedge Printing Plate, Warren-3Weight 1000 g, PE-5780
Weight 1000gWeight 2 lbs, for 1125
Weight 2000 g, PE-5780Weight 5000 g, PE-5780
Wedge Printing Plate, Warren-2Weight Bar 2, for 2121/2122
White Scrub Panel P122-10NWeight Bar 3, for 2121/2122
Wire-wound rod 10″ - 0,2 milsWiper Method Accessory Kit
WinDisp 7 SoftwareWiper Blades, 25 pcs.
Wet Drawdown Template – C, spectro2guideWet Drawdown Template - M
Weight, for Sandpaper HolderWeight, 500g
Weight Set, PE-5780Weight Set
Z
Zahn Type Cup No.5Zirconium oxide beads, 1.4 - 1.6 mm
Zirconium oxide beads, 1.0 - 1.2 mmZirconium oxide beads, 0.6 - 0.8 mm
Zirconium oxide beads, 0.4 - 0.5 mmZirconium oxide beads, 0.2 - 0.3 mm
Zero Plate, PF-5405Zahn Type Cup No.2
Zahn Type Cup No.5Zahn Type Cup No.4
Zahn Type Cup No.4Zahn Type Cup No.3
Zahn Type Cup No.3Zahn Type Cup No.2
Zahn Type Cup No.1Zahn Type Cup No.1
Zirconium oxide beads, 1.8 - 2.0 mm