BYK
  • Sistemas acuosos

¡Minimiza el impacto ambiental de sus sistemas!

BYK ve los sistemas acuosos como la tecnología del futuro. Las pinturas base agua son una moderna alternativa de los sistemas convencionales. En la mayoría de los casos, son igual eficientes y fáciles de manipular, además tienen ventajas en costes y respetan el medio ambiente. Al mismo tiempo, no proporcionan ningún riesgo para la salud tanto de los usuarios como de los consumidores finales.

BYK es su aliado competente para los sistemas acuosos.

En los laboratorios de BYK a nivel mundial, nuestros trabajadores desarrollan soluciones a medida. Nuestro departamento de aplicaciones técnicas le ofrece soporte para encontrar sus necesidades actuales.
Todo con la elevada calidad de BYK que se espera!

Aquí presentamos nuestros aspectos más destacados para sistemas acuosos:

Polymeric Wetting and Dispersing Additive for Aqueous Systems

DISPERBYK-199 is the first VOC-free wetting and dispersing additive to use electrosteric stabilization  and to combine the increased quality requirements and the demand for greater efficiency. It therefore represents a good alternative to the polyelectrolyte-based dispersing additives or the high
molecular weight wetting and dispersing additives which are often used in aqueous systems. DISPERBYK-199 is ideal for inorganic and organic pigments, and particularly recommended for water-based coatings (PVC 16–35) and highly filled pigment concentrates.

Benefits

  • Cost-effective alternative to commonly used dispersants (e.g. Na+ and NH4+ salted polyacrylic acids) and high molecular weight wetting and dispersing additives in aqueous systems
  • Same stabilization mechanism in pigment concentrates and base paints > perfect stabilization and color acceptance
  • Introduces no VOC into paints and pigment concentrates (TVOC < 1500ppm)
  • APEO- and amine-free

Overview of Wetting and Dispersing Additives

VOC-free Wetting and Dispersing Additive for High-Quality Pigment Concentrates

DISPERBYK-2015 is a specialist for high-quality, aqueous pigment concentrates, which was developed based on CPT (controlled polymerization technology). This technology enables a close, defined molecular weight distribution that guarantees an application in many different binder systems. DISPERBYK-2015enables a high level of gloss and exceptional color strengths with optimum viscosity and good leveling properties. 

Benefits

  • Excellent compatibility in a wide range of water-borne resin systems due to narrow molecular weight distribution
  • Good stabilization and deflocculation of organic and inorganic pigments
  • Improves gloss and reduces haze
  • Strong reduction of millbase viscosity allows high pigment loadings
  • VOC-free

Overview of Wetting and Dispersing Additives

VOC-free Silicone Defoamer for Aqueous Systems to Remove the Application-related Microfoam

In 2017, BYK introduced the BYK-1781 additive in order to reduce the occurrence of microfoam in the coating resulting from difficult application methods such as spray painting (HVLP), airless and airmix applications. The new BYK-1786 is the emulsion of BYK-1781. In this form, the additive is easier to incorporate and dose. BYK-1786 is particularly recommended for pigmented and unpigmented architectural, general industrial, protective, wood and furniture coatings, as well as floor coatings, adhesives, sealants, care products and polishes. The additive is VOC- and APEO free and has no impact on transparency, haze, and cratering.

Benefits

  • Perfect defoaming with no or minor effect on optical properties
  • Broad compatibility with various systems (clear, matted, pigmented)
  • Easy to incorporate
  • Particularly suitable for use in airless/airmix applications
  • VOC- and APEO-free
  • Ecolabel-compliant


BYK-1786 – Excellent Clarity in Aqueous Systems

VOC-free Silicone-containing Defoamer for Aqueous Wood, Architectural and Industrial Coatings.

BYK-093 is an additional VOC-free silicone-containing defoamer for aqueous wood, architectural and industrial coatings. It is all-purpose and therefore excellently suited as a standard defoamer in the formulation of aqueous systems. Due to its balanced compatibility, it causes virtually no surface defects such as cratering or fogging. BYK-093 can be used both in pigmented and non-pigmented coatings, and is particularly recommended for contemporary, co-solvent-free binders which form the basis of VOC-free or low-VOC formulations. BYK-093 also supports the excellent long-term stability of the finished coating (both at high as well as low temperatures), is easy to incorporate, and suitable for all standard types of application.

Benefits

  • Environmentally friendly defoamer
  • Excellent long-term efficiency (at high and low storage temperatures)
  • Very compatible, and therefore less surface defects (e.g. turbidity, cratering)
  • Easy incorporation, post-addition recommended
  • Combinations with other defoamers possible
  • Broad application profile
    • Brushing
    • Rolling
    • Flow coatings
    • Curtain coatings
    • Vacumat
    • Spraying
      • Conventional
      • Airless low-viscous
      • Airmix

BYK-093 in a Low-viscous Hydro DIY System, Airless Application

Highly Effective Silicone Additive for Aqueous, Solvent-borne, and UV-curing Systems

BYK-3760 is a unique, highly active polyether-modified polysiloxane. As a result of its low tendency to stabilize foam, BYK-3760 can also be used in applications that involve high shear forces. The additive remains fully effective, even at a very low dosage. At the same time, its outstanding compatibility means that it can be used in a wide variety of resin systems. BYK-3760 is the first representative of a series of new silicone additives that run through an additional production step in which virtually all cyclic siloxanes are removed (D4–D6). As a result, BYK-3760 corresponds to the latest requirements of common ecolabels such as EU Ecolabel, Nordic Swan, Blauer Engel, as well as the specifications for use in food contact applications. BYK-3760 is a modern, highly effective, and universal silicone additive which is produced according to the latest BYK technology standards and recommended for usage in

  • General industrial coatings
  • Wood and furniture coatings
  • Can coatings
  • Architectural coatings
  • Protective coatings
  • Printing inks

Benefits

  • Extremely strong reduction in surface tension

    • excellent anti-cratering properties
    • improved substrate wetting
    • high surface slip – low COF values
    • good scratch resistance

  • Extremely low foam stabilization ⇒ significantly better than standard additives
  • Extensive compatibility in a wide variety of systems ⇒ universal
  • 100 % solid content ⇒ complies with the strict ecolabel requirements; labeling-free

⊕ Ecolabel-compliant
⊕ Cyclic siloxanes content < 0.1%

BYK-3760 – Very Low Foam Stabilization

Fluorine-free, Silicone-containing Additive to Improve Substrate Wetting and Leveling in Aqueous Systems and Solvent-free UV Coatings

Efficient substrate wetting and outstanding leveling are not guaranteed in every system nor are they easy to achieve. A particular challenge is posed by aqueous systems owing to the high surface tension of the medium, and UV systems, which are critical based on their rapid curing and high application speeds. It is for these specific systems that BYK has developed BYK-3456. It is a fluorine-free silicone additive that greatly reduces the dynamic and static surface tension. Even rough and porous substrates (e.g. wood) are wetted perfectly. As BYK-3456 is active both at the interface to the substrate and at the surface, the additive simultaneously improves substrate wetting and leveling. In contrast with many other additives, however, BYK-3456 does not stabilize foam. And there is no negative impact on the recoatability of the system. The additive is compatible with a multitude of resins and stable to hydrolysis across a broad pH range. This is why it is recommended for so many applications:

  • Wood & furniture coatings
  • Architectural coatings
  • General industrial coatings
  • Protective coatings
  • Leather coatings
  • Printing inks
  • Inkjet inks
  • Adhesives
  • Household, industrial and commercial cleaners

Benefits

  • Excellent substrate wetting even on porous substrates, e.g. wood
  • Improved substrate wetting combined with good leveling properties
  • Reduction in the dynamic surface tension
  • Hydrolytic stability at low and high pH values
  • Eliminates craters, fish eyes and picture framing
  • High compatibility with many resins

⊕ Fluorine-free

BYK-3456 – Mode of Action Compared with Standard Additives

Liquid, Polyamide-based Rheology Additive for Modern Aqueous Systems

Over the past years, the focus of developments in protective coatings has increasingly moved to aqueous systems based on epoxy dispersions. These coatings are highly pigmented and applied in thick layers, requiring the rheological properties to be controlled using a suitable additive. The established products are only slightly or even not at all effective, and some are completely incompatible in epoxy dispersions.
The new, polyamide-based RHEOBYK-440, however, is a tailor-made solution for these modern, water-based systems. RHEOBYK-440 does not only provide outstanding anti-sagging and anti-settling properties in water-based protective coatings, it is also recommended for usage in many other applications such as automotive coatings, general industrial coatings, wood and furniture coatings, architectural costings and floor coatings. It can also be used e.g. to achieve a good effect pigment orientation. 

Benefits

  • Especially designed for the latest water-borne epoxy systems

    • Improves anti-sagging and anti-settling properties
    • Provides fast structure recovery. Highly shear thinning
    • Stable rheology when mixed with hardener
    • Stable viscosity over storage

  • Easy to handle and to incorporate

    • Pre-activated, liquid product
    • Post-addition highly recommended
    • No pH-value adjustment necessary; pH-value resistant

  • Final coating properties are not affected (e.g. corrosion resistance, adhesion)

RHEOBYK-440 – High Sag Resistance in an Aqueous Epoxy Primer

VOC-, APEO- and Tin-free Associative Thickener (HEUR) for Aqueous Systems, to Generate a Highly Pseudoplastic Flow Behavior

The addition of pigment concentrates in a basic paint to achieve the desired color can cause problems with regard to rheological behavior. Any co-solvents, imported water or wetting and dispersing additives contained in the pigment concentrates can bring about a significant reduction in the viscosity of the finished paint. With RHEOBYK-7600, BYK is offering a unique associative thickener based on a new technology. RHEOBYK-7600 leads to a considerable increase in the viscosity in the low shear range, stabilizes the viscosity when the colorant is added, and improves the color paste acceptance. The new additive also offers a significantly better leveling properties. As well as being VOC-, APEO-, and tin-free, RHEOBYK-7600 is also liquid, which facilitates incorporation and handling. Due to its composition, it is highly compatible in many aqueous systems. The sagging tendency and the storage stability are improved.

Benefits

  • Very good viscosity stability after tinting
  • Balanced ratio of anti-sagging and leveling
  • Improved colorant acceptance
  • Improved anti-settling and anti-sagging properties
  • Good compatibility with different systems
  • Easy handling and incorporation due to the viscosity of the additive
  • VOC-, APEO- and tin-free

RHEOBYK-7600 – Theoretical Consideration of the Viscosity Stability After Tinting

VOC-, APEO- and tin-free associative thickener for aqueous systems, to generate a highly pseudoplastic flow behavior

RHEOBYK-7610 is an associative thickener for aqueous systems. It generates a highly pseudoplastic flow behavior and considerably increases the viscosity in the low shear range. The most impressive feature, however, is the outstanding self-leveling properties of the finished system. For this reason, alongside good anti-sagging, e.g. at airless/airmix/HVLP application, RHEOBYK-7610 simultaneously offers a perfect surface due to its self-leveling effect. The storage stability and the colorant acceptance have also been improved. Moreover, the foaming behavior of RHEOBYK-7610 is a noteworthy aspect. The additive is liquid and easy to handle. It is not necessary to adjust the pH value or control the temperature during incorporation.

Benefits

  • Very effective in the low shear range
  • Offers self-leveling properties with good anti-sagging
  • For non-dip paints
  • Thick layers possible by spray application (airless/airmix/HVLP)
  • High transparency in clear coats
  • Improvement of the settling properties
  • Easy to incorporate
  • VOC-, APEO- and tin-free

RHEOBYK-7610 – Special Rheology Profile: Self-leveling System

¿Desea obtener más información sobre los aditivos de BYK? Nuestros libros electrónicos muestran los orígenes y los mecanismos de trabajo. Siga este enlaces.