신제품 - 2018 소개 제품
27.11.2018 - BYK-1786
BYK-1786 – VOC-free Silicone Defoamer for Aqueous Systems to Remove the Application-related Microfoam
In 2017, BYK introduced the BYK-1781 additive in order to reduce the occurrence of microfoam in the coating resulting from difficult application methods such as spray painting (HVLP), airless and airmix applications. The new BYK-1786 is the emulsion of BYK-1781. In this form, the additive is easier to incorporate and dose. BYK-1786 is particularly recommended for pigmented and unpigmented architectural, general industrial, protective, wood and furniture coatings, as well as floor coatings, adhesives, sealants, care products and polishes. The additive is VOC- and APEO free and has no impact on transparency, haze, and cratering.
26.09.2018 - BYK-1796
BYK-1796 - Highly Effective Air Release Agent for Solvent-free and Solvent-borne Systems
In many areas, high-solid or 100 % systems make a valuable contribution to reducing or avoiding solvent emissions. One big challenge comes in releasing all of the air from these systems. BYK-1796 is a newly developed air release agent that guarantees fast and efficient elimination of trapped air without altering optical and mechanical properties. The high efficiency of the additive and a good price-performanceratio make it the number one choice for solvent-free systems. One such application example comes in the form of PU or EP floor coatings. BYK-1796 is also recommended for solvent-based systems, e.g. protective coatings, where it also offers a full range of services.
26.09.2018 - AQUACER 1075, AQUACER 1076, AQUACER 8075, AQUACER 8976
The new AQUACER products are VOC- and APEO free wax additives for optimum surface properties in floor polishes. AQUACER 1075 and AQUACER 8075 have a stronger positive impact on surface protection, whereas AQUACER 1076 and AQUACER 8976 have a major influence on anti-slip properties. An optimum product performance can be achieved by a combination of these additives. The attained effects are preserved before and after cleaning. In addition, the AQUACER products show an improvement of the disinfectant resistance and no color shift (yellowing) of the applied film. The wax additives offer an excellent price/performance ratio and are extremely suitable for PVC, linoleum, parquet, rubber floorings, granite, marble, ceramics, tiles and terrazzo.
AQUACER 8075 and AQUACER 8976 are only available in North America.
14.08.2018 - CERACOL 605
CERACOL 605 - Wax Additive to Improve the Surface Properties of Solvent-borne and Water-borne Coating Formulations with a High Co-solvent Proportion, Especially Can Coatings
CERACOL 605 is a very fine wax dispersion based on carnauba wax, and has been specially developed for can coatings with thin layers. CERACOL 605 contains butylglycol, and is ideal for solvent-borne and aqueous systems with a high proportion of co-solvent. The additive provides low COF values, an excellent scratch resistance and good optical properties, even in the case of thin layers. CERACOL 605 fulfills all food contact legal status requirements, and can be used both for internal and external coatings.
14.08.2018 - AQUACER 1540
AQUACER 1540 - Wax Additive to Improve the Surface Properties of Water-borne Coating Formulations, Especially Can Coatings
AQUACER 1540 is a wax emulsion based on carnauba wax, and has been specially developed for can coatings with thin layers. It is particularly recommended for the area of aqueous can coatings. The additive provides low COF values, an excellent scratch resistance and has no negative impact on gloss, even in the case of thin layers. AQUACER 1540 fulfills all food contact legal status requirements, and can be used both for internal and external coatings.
07.08.2018 - BYK-1680
BYK-1680 - VOC-free, Liquid Defoamer for Water-borne Construction Material Applications, in Particular in Combination with Concrete Additives Based on Polycarboxylate Ethers
BYK-1680 is characterized by a very good spontaneous and controlled long-lasting defoaming effect as well as by an excellent miscibility in aqueous polymer solutions and building material formulations. Due to the very good compatibility neither phase separation nor turbidity occur in concrete admixtures. BYK-1680 is long-term stable even at elevated storage temperatures, improves the flow behavior and can be added to the end system at any time during production, without any limitation.
10.07.2018 - BYK-3456
BYK-3456 - Fluorine-free, Silicone-containing Additive to Improve Substrate Wetting and Leveling in Aqueous Systems and Solvent-free UV Coatings
BYK-3456 is a fluorine-free silicone additive that greatly reduces the dynamic and static surface tension. Even rough and porous substrates (e.g. wood) are wetted perfectly. As BYK-3456 is active both at the interface to the substrate and at the surface, the additive simultaneously improves substrate wetting and leveling. In contrast with many other additives, however, BYK-3456 does not stabilize foam.
26.06.2018 - AQUACER 583
AQUACER 583 – Wax emulsion to improve the surface characteristics of seed coatings
Seed coatings are the current standard in agriculture. The reasons for this are many. An applied protective film prior to use increases the productivity on-site through better processing conditions and higher protection against outside influences. AQUACER 583 is a new non-ionic wax emulsion for aqueous seed coatings. The additive improves the abrasion resistance, the free-flowing and plantability of the seeds. Additionally AQUACER 583 hat a positive impact on gloss and anti-blocking properties.
26.06.2018 - DISPERPLAST-1180
DISPERPLAST-1180 – Low-volatile and solvent-free wetting and dispersing additive for filled, plasticizer-containing PVC dryblends/compounds
The new DISPERPLAST-1180 is a very efficient wetting and dispersing additive for highly filled systems in which conventional processing aids and standard wetting and dispersing additives reach their limits. Quite regularly, the filler content in formulations is increased in order to improve the efficiency causing undesirable effects. The use of DISPERPLAST-1180, however, does not only facilitate reducing the formulation costs by increasing the filler content, it also improves the quality of the end product. DISPERPLAST-1180 is therefore particularly suitable for high-quality laminated systems such as PVC design floorings (LVT).
13.02.2018 - BYK-325 N
BYK-325 N – γ-Butyrolactone-free Surface Additive for Solvent-borne Coatings
The new BYK-325 N is equal in performance to well-known BYK-325 but avoids any exports restrictions because it is free from γ-butyrolactone.
13.02.2018 - BYK-1166
BYK-1166 – Wetting additive for PVC plastisols to reduce the viscosity in the low shear range
Currently not available in North America
The new BYK-1166 is the latest development within the BYK-1160 series. All of these products work very effectively to reduce the low shear viscosity of PVC plastisols based on pseudo-plastic PVC grades. Occasionally, in PVC plastisols containing azodicarbonamide (AZO) as a blowing agent, the additives of the BYK-1160 family can cause yellowing in the final product. This is a limiting factor – especially in the wallcovering industry. BYK has therefore developed BYK-1166 which has been evaluated within the European PVC foam resins most widely used in the industry. The latest member of the BYK-1160 family has low volatility and can be used in a wide range of PVC applications (except low fogging for automotive). It is especially recommended for chemically foamed PVC plastisols where white index and surface properties are of importance. BYK-1166 shows the best heat stability of all products within the BYK-1160 family.
06.02.2018 - BYK-C 8013
BYK-C 8013 – Solvent-free, polymeric coupling agent to increase the mechanical strength of carbon fiber-reinforced, radical-curing systems
BYK-C 8013 is the world’s first coupling agent for carbon fibers. It is used in vinyl ester and unsaturated polyester resins that will be subsequently processed with carbon fibers into composite components. Strengths transverse to the fiber are considerably increased and therefore enable a greater design freedom. The improved fiber-matrix bonding in BYK-C 8013 increases both the transverse tensile strength as well as the flexural strength of the composite. The chemical composition of the additive enables bonding to the fibers and simultaneously to the resin matrix. This unique characteristic allows changes in the component design and the production of more resilient parts. BYK-C 8013 shows a considerable increase in mechanical strengths up to 70% particularly in hot curing processes such as SMC/BMC, Pultrusion, Prepreg or RTM. The reactive additive can be added to the sizing during the fiber production or to the resin shortly before processing.
As a subsequent so-called “second sizing”, BYK-C 8013 can be applied onto the fiber, for example by spraying, without having to remove the first sizing beforehand. BYK-C 8013 is recommended for all carbon fiber types.
09.01.2018 - DISPERBYK-2157
DISPERBYK-2157 – VOC- and solvent-free wetting and dispersing additive for non-polar systems
DISPERBYK-2157 is a VOC- and solvent-free wetting and dispersing additive for non-polar solvent-borne and solvent-free inkjet inks, printing inks, protective and architectural coatings as well as PVC plastisols. The additive is excellent compatible with solvents, like paraffins, isoparaffins, vegetable oils, mineral oils or plasticizers. DISPERBYK-2157 is recommended for all kinds of pigments and greatly improves optical properties such a color strength, transparency and gloss. In inks and coatings applications DISPERBYK-2157 provides a strong reduction of the mill base viscosity and a good stability. In PVC applications the additive shows a strong decrease of batch and final plastisol viscosity and moreover offers an excellent heat stability.