Which additives can be used in a waterbased epoxy-based floor coating formulation to create an anti-settling effect?

Such anti-settling properties can be achieved by using specially developed additives such as OPTIGEL-WA or LAPONITE-S 482 build a network in the system, and…

I need to disperse a high load of fumed-silica into a liquid epoxy resin to thicken the binder and a rheology agent to…

Disperbyk-103 is one of the wetting and dispersing additive for silicas. This additive gives better flow properties and it is possible to add even more silica…

Which wetting- and dispersing additive can be used to stabilize fillers like calcium carbonate, barium sulfate or others…

Filler particles that are not properly wetted, dispersed, and stabilized tend to: create a high viscosity cause the filled polyol to be improperly mixed with…

Which additive can be used to produce filled or pigmented epoxy systems with a homogenous distribution of solid…

DISPERBYK-2152 or DISPERBYK-111 are a wetting- and dispersing additives, which can be added during the grinding process to improve the incorporation and…

Which additives can be used in a polyurethane-based floor coating formulation to increase the viscosity and to create an…

Such flow properties can be achieved by using specially developed additives such as RHEOBYK-D 410 and RHEOBYK-R 605 , which adsorb onto the particle surface,…

Which wetting- and dispersing additive can be used to stabilize fillers or pigments in an aqueous epoxy-based floor…

Fillers or pigments that are not properly wetted, dispersed, and stabilized tend to: create a high viscosity exhibit poor compound flow behavior ANTI-TERRA-250…

I need high jetness for my black paint, how can I achieve this?

pigments, resin-free or in a shear stable resin. DISPERBYK-2012 and DISPERBYK-2014 can be used for both grinding methods, while the DISPERBYK-190 is recommended…

I need a defoamer which is food contact compliant according to FDA 175.300. Which additives can you recommend?

This defoamer is polymer based and helps to achieve good defoaming properties in can coating formulations. Water-based system For water-based formulations it is…

What flame retardant additives can you recommend for my intumescent coating?

flame retardant additive like we do for plastics (e.g. for cable coatings), but we can recommend some additives that improve the performance of intumescent…

I'm facing a pinhole issue in my 3C1B system. The primer surfacer and base coat are water-based. The clear coat is…

coat is applied on top. The post addition of 1-3% of BYKETOL-WA or BYKETOL-AQ can increase the pin-hole limit. Especially combinations of defoamers like BYK-015

For 2 tone application developments are ongoing for overspray free paint application. How can I improve the substrate…

To insure a sufficient substrate wetting of the base coat during overspray free paint application, you usually have to use higher quantities of silicone…

How can we avoid seeding when using LAPONITE-RD in water-based base coat?

First LAPONITE has to be added slowly into demineralized water while stiring. This avoids the formation of gel particles. Also it is important only to add the…